Using the Numeric Answer Type
The Numeric Answer type can be used in many ways e.g. to show different units, use decimal places, set boundaries and limits that send notifications when exceeded.
In this Article
You can use the Numeric Answer type by adding it to an existing form or adding it to a custom form.
To do this simply:
- Log in to the Web Console (Computer Log in).
- Go to Forms.
- Either click the Oange plus button to create a new form or the edit button to alter an existing form.
- Click the Question button to add a new question.
- Change the Answer Type to Numeric.
- Then adjust the following tools to suit you
Selecting a Unit
Units can be used in Numeric Answers, these will then display the unit in the answer when it comes to reporting.
Select from these units:
- Temperature.
- Weight.
- Volume.
- Distance/Length.
- Custom Unit.
- Enter the Unit Name & Unit Symbol you need.
Using Decimal Places
You can set your precision by selecting how many decimal places you want to be displayed.
- 0 = a whole number e.g. 1, 2, 10, 52
- 1 = 1 Decimal Place e.g. 1.0, 20.8, 100.7
- 2 = 2 Decimal Places e.g. 3.00, 45.09, 309.99
Once you've set the decimal place, you don't need to add it again in the form. Just type in the number and the decimal place will be added for you, like an Eftpos machine.
Set Numeric Boundaries
This is the Advanced numeric feature, where you can set limits that your team can't exceed. You can also set warning values, where if they are exceeded then they will need to explain why and you can get notified.
To set this up:
- Click the Use Warnings & Limits toggle
- Enter the Minimum and maximum value allowed - your team won't be able to enter a number outside of this range.
- Enter the Lower & Upper Warning value - your team will have to explain why a number is out of this range.
- You can then set what the warning message is. This is displayed if the value exceeds the Lower and upper Warning values.
- SAVE.
Reject Values:
If your team has additional Reject Values for your temperature checks simply:
- Click the Enable 'Reject Values' toggle
- Enter the Upper Auto-Reject Value & Lower Auto-Reject value - your team will have to explain why a number is out of this range.
- You can then set what the additional warning message is. This is displayed if the value exceeds the auto-reject value.